ADC Signal-to-Noise Ratio and Distortion (SINAD)

The Signal-to-Noise Ratio and Distortion (SINAD) is measured with a sinusoidal input near full-scale applied to the ADC. The SINAD is found by computing the ratio of the RMS level of the input signal to the RMS value of the root-sum-square of all noise and distortion components in the FFT analysis, excluding the DC components. The SINAD value is a useful measure of ADC performance because it includes the effect of all noise, distortion, and harmonics introduced by the ADC. SINAD can be calculated with SNR and THD as given below.

(1)
\begin{equation} SINAD = -10 ∙ log({10}^{-SNR/10} + {10}^{THD/10}) \end{equation}
​

  Return to Top

© 2021 Microchip Technology, Inc.
Notice: ARM and Cortex are the registered trademarks of ARM Limited in the EU and other countries.
Information contained on this site regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer's risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights.